Advertenties
Beschikbare talen
Beschikbare talen
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
3.13
Dimensions and format of suitable diamond slitting wheels
Diamond slitting wheels must meet the following require-
ments in terms of dimensions and format.
Technical data
Slot width between segments
(G)
Cutting angle
4
Consumables
Use only synthetic resin-bonded, fiber-reinforced wheels with a maximum Ø of 125 mm (5") approved for a
rotational speed of at least 11000 rpm and a peripheral speed of 80 m/s.
ATTENTION! When cutting or slitting with cut-off wheels always use the standard guard with the
additional front cover, or a fully enclosing dust hood.
Accessory tools
Abrasive cut-off wheel
Diamond cut-off wheel
Abrasive grinding wheel
Diamond grinding wheel
Wire cup brush
Wheel brush
Diamond core bit
Abrasive resin-fiber
wheel
Suitability of discs for the equipment used
Item
Equipment
Guard
A
(standard)
Front cover
B
(in combination with
A)
Dust hood (grinding)
C
DG-EX 125/5"
34
English
≤ 10 mm
Negative
Application
Designation
Cutting, slitting
AC-D
Cutting, slitting
DC-TP, DC-D
(SPX, SP, P)
Rough grinding
AG-D, AF-D,
AN-D
Rough grinding
DG-CW
(SPX, SP, P)
Wire brushes
3CS, 4CS
3SS, 4SS
Hole cutting in
DD-M14
tiles
Rough grinding
AP-D
AC-D
AP-D
AG-D
AF-D
AN-D
✓
✓
✓
—
—
—
Meaning
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
Material
Metal
Mineral
Metal
Mineral
Metal
Mineral
Metal
DG-CW
(SPX⁄SP⁄P)
(SPX⁄SP⁄P)
✓
✓
—
—
—
✓
2233920
*2233920*
max.
max.
thickness
diameter
2.5 mm
125 mm
3 mm
125 mm
6.4 mm
125 mm
—
125 mm
—
75 mm
27 mm
125 mm
—
125 mm
—
125 mm
DC-TP
3CS⁄4CS
DC-D
3SS⁄4SS
DD-M14
✓
✓
✓
—
—
—
Advertenties
