Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
E N
Problem
Machine won't turn on.
The pod loading lever does not
reach the closing position.
Pump won't start.
Machine won't supply coffee.
Coffee is not hot enough.
Coffee pours out too quickly and
the espresso cream cannot be
obtained.
E N
• Voltage: 220-240 V, 50/60 Hz
• Overall output: 1,300 W
• Tank capacity: 1.2 l
• Weight: 3.6 kg / 7.9 lb
• Materials used for the framework: thermoplastic
materials
20
TROUBLESHOOTING
Possible cause
The machine has not been con-
nected to the power mains.
The drop / used pod collecting
tray is full.
The pod has been put in wrongly.
Water is lacking in the tank.
The pod has not been put in.
The optimum temperature has
not been reached.
The pod loading lever has been
lifted.
Water is lacking in the tank.
The cups are cold.
Too much coffee water has been
supplied.
A used pod has been put in.
TECHNICAL FEATURES
• Dimensions: Height: 23.5 cm / 9.2 in
The technical features are shown on the data plate
found on the machine.
Solution
Verify that the plug has been cor-
rectly put into the socket.
Empty the drop / used pod col-
lecting tray.
Lower the pod loading lever and
correctly put the pod in.
Fill the tank with fresh, drinkable
and non-effervescent water, then
charge the hydraulic circuit again.
Put the pod in.
Wait until a suitable temperature
is reached.
Lower the pod loading lever.
Fill the tank with fresh, drinkable
and non-effervescent water, then
charge the hydraulic circuit again.
Pre-heat the cups by supplying
hot water to them.
Wait at least 20 seconds after the
last coffee has been supplied.
Put a new pod in.
Width: 13 cm / 5.1 in
Depth: 36 cm / 14,1 in
Advertenties
Inhoudsopgave
