Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Size of
baby bottle
110 ml
250 ml
• Press the button to start the unit.
• At the end of the cycle, there is an audible signal (5 beeps) and flashing indicator
light. Press the button again and unit will stop beeping, then unplug the appliance.
• Lift the housing vertically by holding the ring to avoid tipping over the milk bottle.
Note: Before drinking, screw the cap tight and shake the bottle lightly to
ensure an even milk temperature.
Sterilizing utensils
• Fill the water tank in the base with MAX level water.
• Put the tray into the heating unit.
• Empty the baby bottle, then stand it upside down on the tray.
• Put the steam cover on the base, then turn clockwise to fix in position.
• Connect unit to power source.
• Turn the knob to setting 5 (around 5 minutes).
• Press the button to start the unit.
• At the end of the cycle, there is an audible signal (5 beeps) and flashing indicator
light. Press the button again and the unit will stop beeping, then unplug the
appliance.
CLEANING AND MAINTENANCE
• Before cleaning, unplug the appliance and allow it to cool down completely.
• Never immerse the housing in water to clean.
• Wipe the outside surface with a wet cloth.
• Do not use corrosive detergent, detergent with chemical powders or hard metal
wire mesh to clean, as this will damage the appliance surface, affect the service
life and cause safety problems.
BÉABA baby bottle (Glass)
Quantity
of water
temperature
60 ml
90 ml
150 ml
240 ml
16
Original
Time to set
Chilled
Ambient
Chilled
Ambient
Chilled
Ambient
Chilled
Ambient
(min)
2
1.5
2
2
2.5
2
3
2.5
Advertenties
Inhoudsopgave
