Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Quick Start Guide
How does the heater control work?
The control allows you to choose when you want heat and at what temperature.
When using a timer mode (see below)
tell you when the heater is maintaining the temperature displayed. The current
time will be displayed when the heater is outside of a timed heating period.
When
Manual,
Schedule or
always maintain the temperature shown on the home screen.
Set the Time
To set the date and time on the heater, press Menu, then press Up three times
to highlight the
Date & time Icon, press Enter. Use the Down and Up to
increase/decrease the hour, press Enter to confirm. Repeat this process to set the
minutes, Day, Month and Year. Press Enter to confirm and return to home screen.
Set the Temperature
The temperature shown on the display is the target room temperature known
as Setpoint. This is the temperature that the heater will maintain during the
heating periods. If the room temperature is above this temperature then the
heater will not operate. The heater leaves the factory with this temperature set
at 21
o
C which represents a typical comfortable room temperature. If you require
a di erent room temperature then press either Down or Up until the display
shows the temperature you require
Your heater comes pre-programmed with four heating periods. These periods
set the time and temperature at which the heater operates in Comfort ON
mode. These four periods are:
• P1: 07:00 – 09:00 21
o
C
• P2: 10:00 – 12:00 7
o
C
• P3: 13:00 – 15:00 7
o
C
• P4: 17:00 – 21:00 21
o
C
Child Lock
If you need to lock the controls so that the settings cannot be changed then
activate the Child Lock. To lock the controls press and hold both the Back button
and Enter button together for 3 seconds. The
1
Back Button
2
Menu Button
3
Advance Button
4
Up & Down
5
Enter
6
Indicator "ON"
DO NOT
7
Days of the Week
Open Window
8
Display Screen
Lock
9
Indicator "OFF"
Sound
© Glen Dimplex UK Limited. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without
prior permission in writing of Glen Dimplex.
will display on the home screen to
Frost modes are being used the heater will
Lock icon will appear on the
1
2
3
4
5
6
7
Schedule
Manual Mode
Frost Protect
Set Time & Date
Advance
screen. To unlock repeat the action by pressing both the Back button and Enter
for three seconds.
Advance
Sometimes you may be at home when you had not planned to be or need to
leave when you had planned to have heating on. You can change the way you
use your heating temporarily; this temporary change is achieved using the
Advance function.
When a timer has been selected, the Advance function allows you to begin
the next period early. If the heater is in a Comfort O period and you want
heat - press the Advance button. The Advance icon
the screen. If the heater is in the Comfort On and you don't want heat, press
the Advance button and it will go o until the beginning of the next Comfort
On Period.
The controls are located on the top of the heater. The heater is fitted with an
adjustable electronic controller consisting of a display screen and six touch
sensitive buttons:
CONTROLLER BATTERY REPLACEMENT
Battery power will only be used when there is no power to the unit
Expected battery life is 5 years
Should you need to replace the battery, please use a CR 2032 3V
button cell type b
no power to the unit
8
9
Should you require after sales service, please contact the retailer from
whom the appliance was purchased.
Please do not return a faulty product to us in the first instance as this may
result in loss or damage and delay in providing you with a satisfactory service.
Please retain your receipt as proof of purchase.
attery. Power will only be used when there is
After Sales Service
Recycling
For electrical products sold within the European
Community. At the end of the electrical product's useful
life it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice in your
country. Batteries should be disposed of or recycled in
accordance with WEEE Directive 2012/19/EU. Packaging
should be recycled where possible.
Website: www.dimplex.nl
Website: www.dimplex.eu
will be displayed on
Advertenties
Inhoudsopgave
