Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
off automatically, the Buzzer can give out an alarm. Should this happen, wait for some minutes and cool it
down. After that, the appliance will work without problem.
USE OF CONTAINERS
1. Usable Pans/Pots
Steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with diameter from 12 to 22cm.
2. Non-usable Pans/Pots
Heating-resistant glass, ceramic containers, copper, aluminum pans/pots, Rounded-bottom pans/pots with
bottom measuring less than 12 cm.
CLEANING AND MAINTENANCE
1. Disconnect plug and wait until the appliance is cooled down completely. Clean after using every time.
2. If the pots/pans are used without being cleaned, discoloration or cooked on stains may be caused.
3. Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker.
4. Wipe using dish washing agent and damp cloth.
5. Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
6. Never run water over the appliance (Water gets inside may cause malfunction).
TROUBLE SHOOTING
Please check below table for reference once the trouble code appears on the digital display.
Trouble Code
E0
E1
E2
E3
Possible Reasons
No
pot/pan
on
Unsuitable pot/pan on the plate.
Supply voltage is too low (less
than 85V).
Supply voltage is too high (more
than 275V).
Plate surface temperature sensor
is not connected well, or short
circuited. Please check it after
one minute.
Solution
Place a suitable pot/pan on the
the
plate.
plate.
Check the power supply. Power
on after the power supply is
back to normal.
Check the power supply. Power
on after the power supply is
back to normal.
Please find qualified persons to
solve the problem.
- 7 -
Advertenties
Inhoudsopgave
