Advertenties
Beschikbare talen
Beschikbare talen
• Do not to install the spa on carpet or other floor materials
(e.g. untreated cork, timber or other porous materials) that
promote or harbour moisture and bacteria, or that could be
affected by water treatment chemicals used in the spa.
• Empty the spa before remove it from the chamber or
building.
2. Outdoor Installation:
• During filling, draining or when in use, water may flow out of
the spa. Therefore the Lay-Z-Spa should be installed near a
floor drain.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time.
• Consult your local professional installers for environmental
conditions, such as ground water and risk of frost.
• Recommended to protecting the spa from direct sunlight
exposure by a cover when not in use.
WARNING: Before inserting plug into a power outlet, make
sure the current rate of the power outlet is suitable for the
pump.
WARNING: Using an extension lead or multi plug adaptor
with the spa heater can cause the plug to overheat, causing
damage to the equipment and surrounding items. The spa is
a class I electrical appliance and must be connected directly
to a grounded socket. It is recommended to only use a
socket which is resistant to humidity and capable of high
power loading. Regularly check the plug and socket for signs
of damage before using the spa – do not use the spa if the
plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
WARNING: The PRCD plug must be tested before each use
to avoid risk of electric shock.
WARNING: Do not use the pump if this test fails. For
assistance, please visit the support section on our website,
www.bestwaycorp.com.
PRCD WARNING
12
Advertenties
