Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DE
TROUBLESHOOTING
EN
FR
NL
IT
ES
PL
water in the appliance, carefully push the shovel towards the back, using
your fingers, and then restart the appliance.
Problem
Loud noise from
compressor.
„Add Water" indicator
lit.
None of the indicators
is lit when the ice cube
maker is switched on.
30 von 96
Copyright UNOLD AG | www.unold.de
1.
Important: If ice cube production is interrupted, for
instance by a power failure, disconnection from power supply
or inadvertent pressing of the „ON/OFF" button, small pieces
of ice might form on the ice cube shovel (fig. 1). Pull the
plug from the power socket, push the shovel towards the
back of the appliance and remove the ice.
2.
If the shovel does not transfer the ice cubes into the
basket, the water level might be too low. If there is sufficient
Cause
Voltage too low.
Insufficient water in
water tank.
Air in pump.
The appliance is not
connected to the power
supply.
An appliance
component is
defective.
Remedy
Switch off the appliance
and check whether it is
correctly connected to
a 220–240 V~ power
socket.
Add water to the "Max."
mark.
Press the "ON/ OFF"
button to start the ice
cube maker.
Check whether the plug
is correctly inserted in
the power socket.
Contact our customer
service department.
Stand 21.3.2024
Advertenties
Inhoudsopgave
Probleemoplossen
