Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
11. Move the On/Off switch to position 0 when the brewing process has ended and no
more espresso is trickling into the espresso pot. The brewing process need up to
10 minutes.
12. Remove the mains plug from the mains socket.
13. Remove the espresso maker from the base station and serve your espresso.
14. Allow the espresso maker to cool down completely after each use before you use it
again or clean it.
02609_DE-GB-FR-NL_V3.indb 16
02609_DE-GB-FR-NL_V3.indb 16
16
6a. If you want to brew 6 cups of espresso, fi ll the funnel-
shaped sieve insert up to its edge with espresso pow-
der and smooth down the fi lled powder and remove
any excess espresso powder. IMPORTANT: Only
smooth down the powder. DO NOT COMPRESS IT!
6b. If you want to brew 3 cups of espresso, insert the in-
termediate sieve into the sieve insert.
Then fi ll the intermediate sieve up to the edge
with espresso powder and smooth down the fi lled
powder and remove excess espresso powder.
IMPORTANT: Only smooth down the espresso pow-
der. DO NOT COMPRESS IT!
7. Screw the espresso pot onto the water reservoir.
8. Place the espresso maker onto the electric base sta-
tion. Make sure that the lid of the espresso pot is
closed.
9. Connect the base station to a plug socket that has
been properly installed.
10. Move the On/Off switch to position 1. The operating
lamp lights up when the device is switched on. The
brewing process begins a few moments after the de-
vice is switched on.
19.01.2016 12:21:54
19.01.2016 12:21:54
Advertenties
Hoofdstukken
Inhoudsopgave
