Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Calypso Installation Instructions
After completing the electrical connection at the mounting bracket terminal block, connect the ceiling
fan wiring via the quick connector plug.
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy
and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using
the screws provided.
REMOTE CONTROL
Your ceiling fan is controlled by the remote
control. Before operating the remote, the
following must be considered.
-
1 x CR2025 3V battery is required to
operate the remote control. Pull out the
battery tray (2) by pressing the click (1)
of the battery tray. Place the battery (3)
on the tray and insert the tray back to
remote hand set (4) indicated by "+"
polarity symbol (5). Ensure the polarity
is correct as shown in the battery
compartment.
9 | P a g e
FINISHING THE INSTALLATION
Fig. 8
USING YOUR CEILING FAN
Fig. 9
Advertenties
Inhoudsopgave
