2. SAFETY INSTRUCTIONS
2.4. Connect device
>
Only connect the device to a properly installed, earthed
and electrically protected socket.
>
Please ensure that the power source (socket) is easily
accessible.
>
Do not kink or crush any cable connections.
>
Before using the device, check whether the voltage
information on the device
corresponds to the local mains voltage. The information
on the power adapter must correspond to the local
mains supply.
>
Only connect the radio to a properly installed socket of
220–240 V AC, 50–60 Hz.
>
Place the radio on a firm, level surface.
>
The device consumes power in standby mode.
To completely disconnect the device from the mains,
the power adapter must be unplugged from the socket.
2.5. Protect the device from defects
>
Unfavourable environmental conditions such as
moisture, excessive heat or lack of ventilation can dama
ge the device.
>
Only use the device in dry rooms.
Avoid the direct vicinity of: Heat sources such as
radiators, open flames such as candles and devices
with strong magnetic fields such as speakers.
94
EN
NOTE!