All valid regulations and standards, as well as recognised
rules of technology such as the DIN VDE 0100 series and the
technical connection requirements, must be observed,
particularly the following standards:
DIN IEC 60364-7-701 (DIN VDE 0100-701)
Requirements for special installations or locations –
Locations containing a bath or shower
DIN IEC 60364-5-52 (DIN VDE 0100-520) Wiring
systems
The remote control may not come into contact with moisture.
The component must not be used for the following
applications under any circumstances:
Outdoors
Underwater
In potentially explosive atmospheres
In swimming pools, saunas or steam baths
Exceeding the load limit required for the power pack is
possible through an incorrect combination of the system
components. This can be the case if LED strips are expanded
by soldering. The component of the LIPROTEC system must
not be used in the wrong combination.
Intended use includes the reading and understanding these
instructions and the observance and following of all
information in these instructions, especially the safety
instructions.
Any other use is expressly considered not to be intended and
leads to an expiration of the warranty and liability claim.
Bluetooth receiver operating instructions
EN
Safety
19