Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Switching on/off
Switching on
•
Hold the equipment by the handles with both hands (thumbs un-
der the additional handle).
•
Slide the safety lock-off (Fig. 3/Item 4) to the front and hold.
•
Switch on the equipment with the On/Off switch (Fig. 3/Item 3).
You can then release the safety lock-off.
Switching off
Release the On/Off switch (Fig. 3/Item 3).
7. Working with the hedge trimmer mounting kit
•
Check that the cutters work properly. The twin-bladed cutters ro-
tate in opposite directions, thus guaranteeing high cutting perfor-
mance and smooth operation.
•
Take care to maintain a steady foothold and hold the equipment
firmly in both hands away from your body. Before you switch on,
make sure that the equipment is not touching any objects.
GB
Work practice
•
A hedge trimmer can be used to cut shrubs and bushes as well as
hedges.
•
To obtain the best cutting results, hold the hedge trimmer so that
the cutter teeth are at an angle of approx. 15° in relation to the
hedge (see Fig. 17).
•
The twin-bladed cutters rotate in opposite directions, thus enab-
ling cutting in both directions (see Fig. 18).
•
It is recommended to tie a guide line of string or the like along the
hedge so that you cut the hedge to a level height. Cut off all bran-
ches which protrude beyond the guide line (see Fig. 19/20).
•
Cut the sides of the hedge with curve-shaped movements from
the bottom up (see Fig. 21).
Anl_PE_AHH_18_Li_Basic_SPK7.indb 278
Anl_PE_AHH_18_Li_Basic_SPK7.indb 278
- 278 -
21.01.16 15:36
21.01.16 15:36
Advertenties
Hoofdstukken
Inhoudsopgave
