Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Before starting the equipment
The equipment is supplied without batteries and without a
charger.
Caution! Do not fi t the battery until the equipment has been fully
assembled and all the settings have been actuated. Always wear
protective gloves when working on the equipment to protect yourself
against injury. Carefully unpack all parts and check that they are com-
plete (Fig. 1).
5.1 General information on assembly
a) Fig. 2-3: Push the tube (7) onto the handle housing (2a) as far as
the bead (7a) and screw it tight with the assembly nut (6).
b) Fig. 4: Hook the carabiner (A) of the shoulder strap (8) into the
strap attachment (B).
c) Fig. 4a: The additional handle consists of the handle (N), the he-
xagon screw (P) and the lock (F). It is fi tted to the handle attach-
ment (U) as illustrated. Push the hexagon screw (P) into the hand-
le (N) and screw it tight to the lock (F).
GB
5.2 Fitting the hedge trimmer mounting kit to the motor head
(Fig. 5-6)
The guard must be slipped over the hedge cutter blade in order to
prevent injuries.
1. Position the hedge trimmer mounting kit and the motor head such
that the arrows on both parts coincide.
2. Press the hedge trimmer mounting kit against the motor head.
This will cause the lock button (R) to be pushed to the right. Turn
the hedge trimmer mounting kit clockwise. The hedge trimmer
mounting kit will lock onto the motor head and is then secured in
place. This will cause the lock button (R) to be pushed to the left.
Anl_PE_AHH_18_Li_Basic_SPK7.indb 274
Anl_PE_AHH_18_Li_Basic_SPK7.indb 274
- 274 -
21.01.16 15:36
21.01.16 15:36
Advertenties
Hoofdstukken
Inhoudsopgave
