Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
adjust the position of the brake lever by screwing it on once the handles have been
EN
installed.
2. Use the markings on the handles to help you. R marks the right-hand handle and L
marks the left-hand handle.
3.3. FOLDING/UNFOLDING THE DEVICE
The unit can be easily folded and unfolded using the folding/unfolding lever. This
operation must always be carried out with care to avoid any risk of pinching or
jamming.
Folding
1. Place the unit horizontally in front of you.
2. Using the button on the handlebar lever, lower the lever as shown in the image
above.
3. Lower the frame.
4. Press the button before pulling the lever and folding the frame onto itself.
Unfolding
1. Unfold the frame.
2. Return the frame to its original position.
3. Push the lever with the folding system while holding the frame until it retracts onto
the frame. You should hear a click.
4. Unfold the rod.
5. Return the stem to its original position.
6. Lift the folding system lever until it retracts into the stem. You should hear a
locking click.
3.4. CHARGING AND BATTERY INDICATOR
Charge the battery before first use. To do so, charge the device using the charger
supplied.
WARNING: All charging operations must be performed with the original charger
(charger part number listed in the "CONTENTS AND TECHNICAL DATA" section)
supplied with the unit.
The external flexible cable of this transformer cannot be replaced; if the cable is
14
Advertenties
Hoofdstukken
Inhoudsopgave
