Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH (Original instructions)
1.
Switch trigger B
2.
Switch trigger A
3.
Switch trigger C
4.
Hook complete
5.
Tool's cord
6.
Extension cord
7.
Hook
8.
Tool
9.
Holder
SPECIFICATIONS
Blade length
Strokes per minute (min
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
................ DOUBLE INSULATION
................ Do not expose to rain.
................ Remove plug from the mains
immediately if the cable is damaged or
cut.
................ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
Intended use
The tool is intended for trimming hedges.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
Explanation of general view
10. Waist cord hook
11. Cord
12. Arm cord hook band
13. Trimming direction
14. Tilt the blades
15. Hedge surface to be trimmed
16. String
17. Press
18. Chip receiver
Model
-1
)
END220-5
ENE014-1
ENF002-2
19. Nut
20. Shear blade
21. Hooks
22. Fit the hooks into groove
23. Grooves
24. Press the levers on both sides
25. Unlock the hooks
HT-43
HT-49
420 mm
480 mm
1,600
1,600
821 mm
871 mm
2.9 kg
3.0 kg
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
HEDGE TRIMMER SAFETY
WARNINGS
1. Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
2. Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter
blades.
3. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring or its own cord. Cutter blades contacting a
"live" wire may make exposed metal parts of the
HT-53
520 mm
1,600
921 mm
3.0 kg
/II
GEA010-1
GEB041-9
5
Advertenties
Inhoudsopgave
