Advertenties
Beschikbare talen
Beschikbare talen
Available spare parts: Please refer to www.aqua-medic.de.
2. Set-Up
To fix the unit to a wall, disconnect the two wall brackets from the module and fix them directly on the wall or a
mounting plate - preferably near a tap connection. Press module into the brackets - ready.
Then, mount the membrane and connect the tubes. To avoid any failures, follow the instructions carefully:
The connections of the unit are (please refer to Fig. 1):
Note: Before taking the unit into first operation, rinse the pre-filter and then attach it to the reverse
osmosis module!
Tube fittings:
1. Remove the blue lock ring.
2. Insert the hose to a complete stop into the fitting.
3. Refit the lock ring.
4. Pull the hose back as a test that it is located.
Release the plug connection:
1. Remove the blue lock ring.
2. Push the white ring at the fitting. Now, you can remove the tube.
3. Please don't forget to refit the lock ring.
Fig. 1:
1. Water inlet
2. Fine filter
3.
Activated carbon filter
4. Reverse osmosis module
5.
Pure water outlet
6. Waste water outlet
7.
Screw cap membrane's housing
8.
Membrane
9. O-ring
10. Flush valve
8
Advertenties
