3. How to clean the brush rollers
1)
First turn off power and disconnect the floor brush from the appliance.
2)
Floor brush f: push the release switch (F) and twist the roller handle (G) at the same time to take the brush
roller out. Do the same for the brush roller in the other side. Clean off any dirt (hair and other fibers) tangled
around the roller.
3)
Floor brush B: push the lock (H) out to unlock the brush roller from the floor brush. Take it out and remove
any dirt (hair and other fibers) tangled around the roller.
4)
Wash the brush rollers as needed, using only water. fir-dry completely for at least 24 hours before reinstalling.
TROUBLESHOOTING
To reduce the risk of shock and unintended operation, turn off power and remove battery pack before servicing.
Problem
Not pick up debris
Brush roller not spin
Poor suction
Suddenly turns off on its
own
Appliance won't turn on
or charge
Short running time
The appliance power is
not stable
TECHNICAL DATA
Voltage: 25.9 V DC
Power: 220W
fdaptor input: 100-240V~ 50/60Hz
fdaptor Output: 31V DC, 0.5f
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
Possible cause
Dust cup is full
Filters clogged or dirty
Filters are out of service
Brush roller clogged by hair, fibers, etc.
Filters clogged or dirty
Dust cup not installed correctly
Low battery
Nozzle or dirt passage clogged
Dust cup is full
Filters clogged or dirty
Overheat
Low battery
Overheat
Low power
Filters clogged or dirty
This is normal in the "auto-mode". The
suction
power
will
automatically during use
Possible solution
Empty the dust cup
Clean the filters
Change the worn filters
Clean the brush roller
Clean the filters
Reinstall the dust cup
Fully charge the battery
Disconnect nozzle to remove
decries
Empty the dust cup
Clean the filters
Let appliance cool down and retry
Fully charge the battery
Let appliance cool down and retry
Fully charge the battery
Clean the filters
be
adjusted
- 19 -