Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UVC-122311.3
PARTS DESCRIPTION
1. Battery pack
2. Dust cup
3. Extension tube
4. Floor brush
5. Long crevice nozzle
6. 2 in 1 crevice nozzle
7. Speed button
8. Handle
9. Dust cup release button
10. Accessory release button
11. Suction hole opening
12. Dust cup locking clip
13. Charging seat/ wall-mounted bracket
14. Charging adapter
15. Charging seat release button
16. Battery pilot light
HOW TO WALL-MOUNT CHARGING SEAT:
1.
Measure the distance between the holes situated at the back of the bracket and drill four holes in the wall
with the same distance.
2.
Put the expansion bolts into the holes and then use the screws to fix the bracket onto the wall.
3.
Pay attention to the height of the bracket mounted.
BATTERY CHARGING:
1.
Battery pilot light indicates the battery status. Red blinking indicates that battery is drained.
2.
Simply dock the appliance into the charging seat for re-charging (Fig.1). Plug the charging adapter into the
power socket.
3.
While charging, the pilot light will be red and blinking; when the charging operation is finished, the pilot light
will turn green.
4.
After charging, unplug first, then press the charging seat release button to take out the appliance.
Note: Do not let the appliance uncharged for a long time, because the inner accumulators may be damaged.
Fig. 1
- 14 -
EN
Fig.2
Advertenties
Inhoudsopgave
