Sunshower COMBI WHITE Installatiehandleiding pagina 11
Verberg thumbnails
Zie ook voor COMBI WHITE:
- Installatiehandleiding (12 pagina's) ,
- Handleiding (24 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
SUNSHOWER PLACEMENT
INSTALLATION GUIDE COMBI | P1807 REV B
2
3
1
INSTRUCTIONS
Place the Sunshower on the lower
bracket (1). Make sure that the
pins engage in the openings in the
lower bracket.
Hook the cord securely into the
groove in the upper bracket (2).
The Sunshower can now be tilted
forward to give you enough room to
make the electrical connection.
Connect the Sunshower cable to
the wiring in the junction box (3).
Make sure that there is at least 65
cm of cable between the junction
box and the Sunshower.
Make sure that the terminals are
connected correctly: the phase
wire (brown) to the phase wire on
the Sunshower and the neutral
wire (blue) to the neutral wire
on the Sunshower. Use the cable
gland to create a strain relief loop
and make a watertight connection.
Close the junction box.
REQUIRED TOOLS
□ Power cable
11
Advertenties
Inhoudsopgave
