INSTALLATION
B
CABLE DUCT
INSTRUCTIONS
If it is not possible to feed the fixed
wiring through a hole in the wall,
the wiring can also be routed to the
Sunshower from the ceiling via the
wall. Use a cable duct to guide the
cable.
Connect the wiring to the
connection terminals in the
junction box.
Use the cable gland to create
a strain relief loop and make a
watertight connection. Close the
junction box.
The junction box must always be
mounted on the right-hand wall.
Always feed the cable in from the
bottom of the junction box.
A
REQUIRED TOOLS
□ Cable duct
A
1280 MM
10
INSTALLATION GUIDE COMBI | P1807 REV B