Advertenties
Beschikbare talen
Beschikbare talen
Never use distilled water exclusively. Do
z
not add any additives (e.g. starch). Do not
use condensation water from a tumble
dryer.
Insert the water tank.
z
Place the appliance on a stable, level
z
surface.
Note: If you use filtering devices or in-house
permanent descaler, make absolutely sure
the water obtained is neutral ph.
(B) Water reserve function
When the water level is becoming low, the
water reserve icon (4) starts flashing. At
this stage it is possible to continue steam
ironing for about 10-15 minutes.
When the water reserve icon turns
permanently on, it becomes necessary to
refill the water tank. To continue steam
ironing, refill the water tank at least up to
the mark "min".
(C) Start into operation
Before start ironing follow the garment
care label instructions carefully. Fabrics
with this symbol
Place the iron on the iron rest (9) or on
its heel rest (7), unwind completely both
cords, plug in the appliance and press the
On/Off button (1a).
The iCare setting
start flashing. The iron will start to heat up.
Once the temperature is reached, the iron
LED and the related steam setting icon turn
permanently on and you hear an acoustic
signal indicating steam is ready.
Steam ironing
Press the steam button (8) to release
steam.
Dry ironing
Iron without pressing the steam button (8).
Please note that after 10 minutes of dry
ironing, the iron switches to the stand-by
mode. After additional 10 minutes the auto
off mode is activated.
are not ironable.
and the iron LED (1b)
Steam shot function
Press the steam button (8) twice in quick
succession. There will be a continuous
steam emission for a few seconds. Press
the steam button once again during steam
emission to stop the function.
(D) Settings
When the appliance is switched on, it
will always be set to the iCare setting,
independently on the last setting chosen.
To switch from one setting to another,
press the mode button (2).
Eco
It is suggested for most delicate garments
like synthetics, silk and blended fabrics. This
setting allows less power consumption.
iCare
It is suggested for garments like wool,
polyester and cotton.
Turbo
It is suggested for garments that need
more powerful steam, like thick cotton/
linen and jeans.
This setting can also be used to refresh and
sanitize garments that were in the closet
before dressing.
Note: Do not use the sanitize function on
people and pets.
Vertical steam
The iron can also be used for steaming
hanging clothes. Hold the iron in a vertical
position. Press the steam button (8) while
moving the iron from top to the bottom.
Caution: steam is very hot. Never iron or
dampen garment while wearing them.
13
Advertenties
