Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Open window detection
If the room temperature drops drastically in a short time span, this
function is activated and the heating stops for 30 minutes� Deactivate this
function by pressing the
Temperature calibtration
Press the
button for 5 seconds to start the calibtration� You can change the
temperature from -5 to + 5 º C�
Deactivate Wireless
Press the button
on the display should dissapear� Repeat to reactivate the Wireless function�
Manual Control
In manual mode, you can control the heating independently of a WLAN connection�
Temperature
Set the desired temperature by pressing the
setting, the display will return to the room temperature�
Timer
Press the
button to enter the timer setting� The display will show either 00 H
or the previous setting� Set the timer with the
Temperature calibration
Press and hold the
Adjust the number by pressing the
-5 to +5 º C�
Child lock
Press and hold the
the screen�
Factory reset
Switch on the heater and press
and hold
for 10 seconds to reset the unit�
Mute operation
If you do not like the „beep" sound when operating the heater, you can deactivate
the sound in the settings after you have connected the heater to the APP�
button for 5 seconds�
for 10 seconds to deactivate the Wireless function�The Symbol
button for 5 seconds to enter the temperature calibration�
or
for 3 seconds to activate the child lock; „CL" is displayed on
until „OFF" is displayed on the screen� Press
43
or
key� Two seconds after
or
buttons�
button� The calibration ranges from
EN
Advertenties
Hoofdstukken
Inhoudsopgave
