Lowering Or Draining Pool Water - Bestway 58515 Gebruiksaanwijzingen
Hmax 1.5 m
Verberg thumbnails
Zie ook voor 58515:
- Gebruiksaanwijzingen (10 pagina's) ,
- Handleiding (45 pagina's) ,
- Gebruikershandleiding (37 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Remove the Strainer Cover by unscrewing it.
4. Take out the Strainer, remove any debris.
5. Put the Strainer back into position. Ensure
the hole in the strainer is aligned.
6. Ensure the Seal Ring is in place. Secure the
Strainer Cover back.
7. Remove the Stopper Plugs and insert the
Debris Screens.
NOTE: The Strainer must be emptied and
cleaned periodically. A dirty or blocked strainer will reduce the
performance of the sand filter.
LOWERING OR DRAINING POOL WATER
1. Switch off the sand filter and set Control Valve to the Drain
function.
2. Detach the Hose from the pool's Port A and sand filter Port A and
attach to Port D.
NOTE: Remember to replace the Debris Screen with Stopper Plug to
prevent water from escaping.
3. Switch on the sand filter to run the filter and remove the pool
water.
WARNING: DO NOT DRY RUN THE SAND FILTER.
STORAGE
In areas that have freezing winter temperatures, pool equipment
must be winterized to protect against damage. Allowing water to
freeze will damage the sand filter and void warranty.
1. Backwash the sand filter.
2. Drain the pool according to the pool owner's manual.
3. Disconnect the two Hoses from the pool and the sand filter.
4. Completely pour the sand out of the tank and dry all components.
5. Store the sand filter in a dry location out of child's reach.
13
Advertenties
Inhoudsopgave
