Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Product Safety Information
Intended Use:
These die grinders are designed for grinding, porting, polishing, de-burring, and breaking
sharp edges.
For additional information refer to Air Die Grinder Product Safety Information Manual
Form 04580288.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Free
Speed Collet
Model(s)
Size
rpm
301
20,000
1/4"
301-EU
20,000 6 mm
307A
27,000
1/4"
307A-EU 27,000 6 mm
308A
25,000
1/4"
308A-EU 25,000 6 mm
3102
20,000
1/4"
3102-EU 20,000 6 mm
3108
25,000
1/4"
3108-EU 25,000 6 mm
† K
= 3dB measurement uncertanity
pA
‡ K
= 3dB measurement uncertanity
wA
*K = Vibration measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573164 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
16573487_ed7
Sound Level dB (A)
(ISO15744)
† Pressure (L
) ‡ Power (L
p
---
---
---
---
83.0
94.0
83.0
94.0
91.0
102.0
91.0
102.0
90.0
101.0
90.0
101.0
92.0
103.0
92.0
103.0
6.
7.
8.
9.
10. Grease - through fitting
Sound Level dB (A)
(ANSI S5.1-1971)
Power
) Pressure
(ISO3744)
w
91.8
104.8
91.8
104.8
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Thread size
Coupling
Safety Air Fuse
Oil
EN
Vibration
(ISO28927) m/s²
Level
*K
5.9
1.0
5.9
1.0
4.5
1.1
4.5
1.1
5.2
1.9
5.2
1.9
5.5
1.5
5.5
1.5
3.7
1.2
3.7
1.2
EN-1
Advertenties
Inhoudsopgave
