Inhoudsopgave
Advertenties
Control Panel
indicator light
on/off
button
timer
button
oscillation
button
How to use
Please plug the power plug into a suitable power outlet before operating. The indicator light lights up and the
oscillation automatically moves back to the center of the device.
On/ Off:
Fan mode: please press the on/off button once to turn on the unit. The indicator light lights up. The fan turns on
automatically and the fan indicator lights up. To select between the 12 wind speed levels, please use the up
and down buttons. The corresponding level is shown on the level display to the left of the room temperature.
Heating mode: Please press the button a second time to turn on the heater. The heating indicator lights up.
Please use the up and down keys to select between the 6 heating levels. The corresponding level is shown on
the level display to the left of the room temperature.
Auto mode: Please press the on/off key a third time to turn on the auto mode. The auto function indicator lights
up. In this function, you can select a temperature between 15° and 35° with the up and down keys. The selected
temperature appears on the temperature display for approx. 5 seconds, then the current room temperature is
shown. "01" lights up constantly on the level display. When the desired temperature is reached, the unit stops
operating. Once the temperature drops below the desired target temperature, the heater will automatically start
and continue operation.
Please press the on/off button one more time. The unit will turn off within 10 seconds.
Oscillation:
Please press the oscillation button:
1x: "00" is shown on the level display
2x: "01" is shown on the level display and the device oscillates 60°.
3x: "02" is shown on the level display and the device oscillates 90°.
4x: "03" is shown on the level display and the device oscillates 120°.
5x: "00" is shown on the level display and the oscillation function is switched off.
Timer:
Please press the timer button to turn on the timer. Please use the up and down buttons to select a time from 0-
24 hours. The timer is activated as soon as you have selected the desired time, it flashes 4 times and then goes
off the display. As soon as the selected time disappears, the existing room temperature is displayed.
LED light:
Please press the LED light button once to turn on the higher light level. Please press the LED light button a
second time to switch to the lower light level. Please press the button again to turn off the LED light. The LED
light can also be used in stand-by mode.
fan mode indicator
heating
level display
indicator
auto- function- indicator
up
button
temperature
display/ timer
LED- light-
button
down
button
Advertenties
Inhoudsopgave
