Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TFA_No. 60.5014_Anleitung_03_21
17.03.2021
SHOW – Radio-controlled projection clock with indoor climate
• To change the brightness of the backlight (5 levels), press SNOOZE/LIGHT button.
• Press the groove and fold out the projector arm (180°).
• Press the FLIP button to adjust the brightness of the projection in 5 steps.
• Press and hold the FLIP button to turn the image by 90°.
• To temporarily activate the backlight and projection, press any button (in battery operation only).
• Note: To avoid interference, the backlight and the projection turn off during the reception of the radio controlled clock.
9. NAP function setting
• Press and hold the NAP button in normal mode for three seconds, to enter the setting mode.
• NAP appears and 15 minutes (default) or the last nap time flashes.
• Press the + or – button to set the desired time duration – it adds 5 minutes at a time (5 to 120 minutes).
• Confirm the setting with the NAP button.
• Once the setting is confirmed, the NAP function is activated and the time display counts down.
• An alarm tone will sound when the set minutes expire.
• NAP 00 will be flashing on the display.
36
17:02 Uhr
Seite 19
SHOW – Radio-controlled projection clock with indoor climate
• Press any button and the nap function will stop.
• To activate the nap function with the last set nap time just press the NAP button in normal mode.
10. Charging function
• Attention: The charging function only works with the power adapter.
• Plug the USB cable (not included) into the USB port on the alarm clock and connect the other end to your mobile device. Make sure
that the USB charging function is suitable for your mobile device (charging current 1A).
• HELLO is displayed shortly after a successful connection, the charging symbol appears and the charging function starts.
• When the mobile device is fully charged, the charge icon will appear filled and disappears after a view seconds.
• Do not apply excessive force when connecting a USB cable. The USB plug fits only one way into the USB port.
11. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents. Protect it from moisture.
• Remove the batteries and pull out the plug of the socket if the device will not be used for an extended period of time.
• Store the device in a dry place.
37
Advertenties
Inhoudsopgave
