Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
g) NFC mode
NFC is the abbreviation for Near Field Communication. Please note that NFC only works if your mobile
device is equipped with NFC as well.
• Turn on the Soundbar.
• Press the SOURCE button (2) repeatedly or the BT button (16)
to activate the Bluetooth
• Activate NFC on your mobile device.
• Place the mobile device on the NFC sensor area; see
adjacent picture. Your mobile device will vibrate or show a
message in the display.
• Start audio playback on your mobile device.
• Remove the mobile device from the NFC sensor area in order
to deactivate NFC on your Soundbar.
If necessary, remove the cover/protective housing from your mobile device during NFC
transmission, in order to ensure a sufficient connection
12. Troubleshooting
Your Soundbar is a state-of-the-art, fail-safe product. However, if any problem occurs, refer to the following
explanations for troubleshooting.
No power connection
• Make sure the power cable is properly connected with the Soundbar.
• Check if the wall socket is live.
• Switch the Soundbar from standby mode (red LED of standby indicator) to operating mode.
Remote control does not work
• Check if the desired audio source has been activated.
• Remote control range has been exceeded or there are objects between the remote control and Soundbar
impacting the signal transmission.
• Remote control not pointed at the Soundbar.
• Battery inserted with wrong polarity (+/-).
• Battery empty. Replace the battery
Bluetooth
name of the Soundbar not shown on the mobile device
®
• Check if Bluetooth
has been activated on your mobile device.
®
• Devices are not paired. Pair your mobile device with the Soundbar.
All manuals and user guides at all-guides.com
mode.
®
NFC sensor area
35
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
