Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Rapid battery charger
Input:
Rated voltage:
Rated frequency:
Rated power:
Output:
Rated voltage:
Charging current:
Protection class:
Fuse (internal):
Charging time:
Battery type PAP 20 A1, 2.0 Ah (supplied):
¾
45 minutes
Battery type PAP 20 A3, 4.0 Ah
¾
(available separately): 60 minutes
Recommended ambient temperature:
While charging:
During operation:
During storage:
Noise emission value
The measured values have been determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
pA
Uncertainty K
:
pA
Sound power level L
:
WA
Uncertainty K
:
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Sanding:
Vibration emission value a
Uncertainty K:
m
WARNING!
Wear ear protection!
26 GB/IE
PLG 20 B1
230–240 V∼
50 Hz
120 W
21.5 V
4.5 A
II /
3.15 A /
+4 to +40 °C
+4 to +40 °C
+20 to +26 °C
:
76.2 dB(A)
3 dB
87.2 dB(A)
3 dB
:
3.72 m/s
2
h
1.5 m/s
2
NOTE
The declared vibration total value and
u
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared total vibration value and the
u
declared noise emission value may also
be used for a preliminary assessment of
exposure.
m
WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed.
Try to minimise exposure to vibration and
noise. Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time. All
parts of the operating cycle must be taken
into account (e.g. times when the power
tool is switched off and when it is running
idle in addition to the trigger time).
Advertenties
Hoofdstukken
Inhoudsopgave
