Advertenties
Beschikbare talen
Beschikbare talen
eng
● Only connect the power tool of protection class I to a socket/extension lead with a functioning PE
conductor. There is a danger of electric shock.
● Do not aim the light beam of the LED fl ood light directly at persons or animals and do not gaze directly
into the light beam of the LED fl ood light even from a great distance. There is a danger of blinding.
● Do not work with the LED fl ood light in an explosive environment. Electric sparks can ignite dust and vapours.
● Do not misuse the connecting cable for carrying the LED fl ood light or for pulling the cable out of the
socket. Keep the connecting cable away from heat, oil, sharp edges or moving parts. Damaged or knotted
connecting cables increase the risk of electric shock. The connecting cable cannot be changed.
● Keep the LED fl ood light away from rain and wet. Penetration of water into the electrical device increases
the risk of electric shock.
● Keep all electrical connections dry and clear from the fl oor. These safety precautions reduce the risk of
electric shock.
● Do not speed up the cooling process of the LED fl ood light by using water. Penetration of water into the
electrical device increases the risk of electric shock.
● The plug of the LED fl ood light must fi t into the socket. The plug must not be modifi ed in any way.
Unmodifi ed plugs and matching sockets reduce the risk of an electric shock.
● Pull out the mains plug or remove the battery before cleaning, servicing or putting away the LED fl ood
light. This safety precaution prevents unintentional starting of the LED fl ood light.
● Secure the LED fl ood light from falling at a hanging height of ≥ 1 m. Keep to a maximum hanging height
of ≤ 3 m. This reduces the risk of accident.
● Children and persons who, due to their physical, sensory or mental abilities or lack of experience and
knowledge are unable to operate the power tool safely may not use this power tool without supervision
or instruction by a responsible person. Otherwise there is a risk of operating errors and injuries.
● Keep the LED fl ood light the permissible minimum distance of ≥ 1 m away from all illuminated surfaces
and objects. The illuminated objects can overheat below this distance.
● Do not cover the light head whilst the LED fl ood light is switched on. Covering will cause the surface of the
LED fl ood light to heat up excessively. The LED fl ood l-amp could otherwise overheat and no longer function
properly. There is a risk of injury and fi re.
● Switch off the LED fl ood light when you are not using it. Never leave the LED fl ood light switched on unattended.
Unattended electrical devices can cause hazards which could lead to material damages and/or personal injury.
● Do not use the LED fl ood light if it is damaged. There is a danger of accident.
● The connecting cable of the LED fl ood light or the power supply cannot be replaced. Dispose the power
supply properly if the connecting cable is damaged.
● Do not use the LED fl ood light on public roads. The LED fl ood light is not licensed for use on public roads.
● Only use original accessories.
Explanation of symbols
WARNING
WARNING
NOTICE
NOTICE
16
Danger with a medium degree of risk which could result in death or severe injury (irreversible)
if not heeded.
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Electrical device complies with protection class I
Electrical device complies with protection class II
Control gear
Short-circuit-proof safety transformer (SCPST)
Not suitable for using outdoors
Power supply, positive polarity
Advertenties
