Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
injury or damage to the device.
WARNING: Make sure the fan is unplugged before removing the cover.
WARNING: Never carry the device while it is switched on.
20. The device is not intended to be operated using external timers or a separate remote
control system.
DESCRIPTION OF THE DEVICE (IMAGE 1 - MS7308, MS7309, MS7310, IMAGE 2 – MS7311)
1 Front guard
4 .Rear guard nut
7. Motor head lock
10. Control panel housing
13. Height adjustment
16. Base
FAN ASSEMBLY
1.Make sure that the power cord is disconnected from the electrical socket.
For model: MS7311 model:
-
assemble the fan base (15, 16) and attach the exterior barrel (14).
-
attach the exterior barrel to the control panel housing (10) using the mounting screw (11)
For all models:
2. Attach the rear guard (5) to the motor unit (6) using the nut (4).
3. Place the fan blade (3) on rotor axis. Fasten with the blade nut (2). Check to make sure that the blade rotates without
resistance.
4. Attach the front guard (1) to the rear guard (5) using the hinge clamps on the outside of the front guard.
USING THE DEVICE
1. Press the '0' button on the control panel (9), then plug the power cord into an electrical socket.
2. Turn the fan on by pressing button '1' or '2' (MS7308)) or '1', '2' or '3' (MS7309, MS7310, MS7311). After a few seconds the
fan blades will begin to rotate at the maximum speed of the selected gear
3. To turn on the oscillating motion of the fan unit (horizontal) press the motor head lock button (7). Pulling the button upwards
will turn the oscillation off (horizontal).
4. You can adjust the fan's vertical angle by tilting the fan unit.
CLEANING AND MAINTENANCE
CAUTION: Do not allow the fan's motor part or any buttons to get wet.
1. Before cleaning remove the plug from the electrical socket.
2. To clean dust from the fan blades, remove the front guard. Remove the fan blade from the rotor axis, wipe with a damp cloth,
then wipe dry.
3. To clean the motor unit gently wipe it with a damp cloth, without detergents. Wipe dry.
4. Store the fan in a dry place.
Technical Data:
Item number / Diameter / Power / Power max: Voltage
MS7308 / 23 cm / 22W / 45W / 220-240V ~ 50 / 60Hz
MS7309 / 30 cm / 35W / 70W / 220-240V ~ 50 / 60Hz
MS7310 / 40 cm / 45W / 90W / 220-240V ~ 50 / 60Hz
MS7311 / 40 cm / 45W / 90W / 220-240V ~ 50 / 60Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere
Zwecke als den bestimmungsgemäßen Gebrauch.
3.Das Gerät ausschließlich an die Steckdose 220-240 V ~ 50/60 Hz anschließen. Es darf
2.Blade nut
3.Blade
5.Rear guard
6.Motor unit
8.Power cord
9.Control panel
11.Mounting screw
12.Interior barrel
14.Exterior barrel
15.Base guard
DEUTSCH
DIESE FÜR DIE ZUKUNFT AUF
4
Advertenties
Inhoudsopgave
