Cleaning And Storage - gourmetmaxx SM-1504 Handleiding

Verberg thumbnails

Inhoudsopgave

Advertenties

Beschikbare talen

The device is equipped with overload protection; the device switches off if it is

overloaded. In this case, pull the mains plug out of the plug socket and allow the

device to cool down for approx. 10 minutes. The device is then ready to be used

again.

1. Place the device with sufﬁ cient clear space above it and on all sides on a dry, ﬂ at and

solid surface. Be aware that there must be sufﬁ cient clear space above to allow the

mixer head (12) to be ﬂ ipped up.

2. Make sure that the suction cups (8) stick to the surface correctly.

3. Place the ingredients you want into the mixing bowl (10).

4. Insert the mixing bowl into the main device (7) and attach the attachment you want

(see "Attaching / Detaching Accessories").

5. The mains plug should be connected to a plug socket that has been properly installed.

The LED ring (2) ﬂ ashes. The device is in standby mode.

6. Use the rotary switch (3) to set an appropriate speed level:

Off

1 – 3

Slow mixing, stirring and kneading

4 – 6

Fast mixing, stirring and kneading

Pulse (short mode at top speed)

To activate pulse mode, the rotary switch must be held in the P position for the

length of time you want.

The mount (11) moves in a circular motion in the mixing bowl and the attachment

rotates around its own axis. The LED ring is lit up constantly while the device is

switched on.

7. To switch off the device, move the rotary switch to the 0 position. The LED ring

ﬂ ashes. The device is in standby mode.

8. Remove the mains plug from the plug socket. The LED ring goes out.

CAUTION – Danger of injury due to rotating device parts! Always wait until

the attachment has come to a complete standstill before ﬂ ipping up the mixer

head.

9. Remove the used attachment and the mixing bowl (see "Attaching / Detaching

Accessories").