Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
G Operating Instructions
Thank you for choosing a Thomson product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Indoor antenna
• Power supply unit
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Children should be supervised to ensure that they do not
play with the device.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Connect the product only to a socket that has been
approved for the device. The electrical socket must always
be easily accessible.
• Disconnect the product from the network using the power
button – if this is not available, unplug the power cord
from the socket.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
2
Warning
• Do not use the product if the AC adapter, adapter cable
or power cable is damaged.
• Do not attempt to service or repair the device yourself.
Leave any service work to
• Do not open the device or continue to operate it if it
becomes damaged.
4. Specifications
Supply voltage
Rated power
consumption
Frequency band(s)
Active antenna gain
Impedance
Connection
Ambient temperature
5. Startup and Operation
Note
Please note that the number and quality of stations
received may vary depending on the position of the
antenna and local conditions.
5.1 The antenna is supplied with power via the
integrated power cable (Fig. 1)
• Connect the coaxial cable that is attached to the antenna
with the set-top box (or to the digital television).
• Plug the power cable unit into a socket.
• After switching on the antenna, turn the dial clockwise
and adjust the position of the antenna. Depending on
horizontal or vertical polarisation in the UHF band, the
dipole can be rotated. Also adjust the position of the
telescopes.
• Depending on the station, the ampli er performance
must be adjusted using the dial. If necessary, the antenna
can also be powered using DC 12 V.
• We recommend that you switch off the antenna when it
is not in use.
quali ed experts.
230 V / 50 Hz
max. 50 mA
UHF: 470 – 790 MHz
VHF: 174 – 230 MHz
UHF: 7 – 18 dBi
VHF: 9 – 15.5 dBi
75 ohm
Coax plug
-20 to +40° C
Advertenties
Inhoudsopgave
