Download Inhoudsopgave Inhoud Print deze pagina

Airflow Modes; Switch Off Time); Cleaning And Care; Cleaning The Blade And The Safety Guard - SilverCrest SV 60 A1 Bedienings- En Veiligheidsinstructies

Verberg thumbnails Zie ook voor SV 60 A1:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

˜ Airflow modes
Press
repeatedly to select the desired
22
 
airflow mode:
Press Mode description
Natural
1x
through different airflow speeds.
Amending airflow speed: In natural
mode, press
1x Mainly low speed
2x Half low half high speed
3x Mainly high speed
2x
Sleep
3 different speed modes (if started
from speed mode 3). The product
decreases the speed mode every
15 minutes and then stays at the
lowest speed mode.
Soft
3x
Normal – constant airflow at the
4x
currently selected airflow speed
(from 1 to 6).
NOTE: The normal mode is the
default mode once power is on.
˜ Timer (automatic
switch off time)
When the product is on, press
 
continuously to set the automatic turn off time.
You can choose from 1 to 8 hours.
– constant cycling
repeatedly:
21
– constant cycling through
– constant soft airflow.
24
˜ Cleaning and care
Before cleaning, press
 
product from the power supply to completely
switch off the product. Remove the battery from
the remote control
m
WARNING! Do not immerse the electrical
parts of the product in water or other liquids.
Never hold the product under running water.
Clean the product with a slightly moistened
 
cloth.
Do not allow any water or other liquids enter the
 
product's interior.
Do not use abrasives, harsh cleaning solutions or
 
hard brushes for cleaning.
Let all parts dry afterwards.
 
˜ Cleaning the blade and the
safety guard
Dust collections on blade
 
2 / 6 can be removed with a brush (not
supplied). In case of serious soiling, the front
grille
can be removed for thorough cleaning.
6
To do so, reverse the steps of the "Assembly"
chapter.
Wipe the grilles 2 / 6 and blade
 
a damp cloth. For stubborn soiling use a mild
detergent on the cloth. Dry completely before
re-assembling them.
NOTE: The grilles 2 / 6 act as safety guards
to protect the user from touching the blade
m
DANGER! Ensure that the product is switched
off from the supply mains before removing the
guard.
Mount the front grille
 
when cleaning is complete.
and unplug the
23
before cleaning.
31
and on the grilles
4
with
4
back onto the product
6
GB/IE/NI
.
4
13

Advertenties

Inhoudsopgave
loading

Inhoudsopgave