Advertenties
Beschikbare talen
Beschikbare talen
F16 AC
6.2
Using the cooler
NOTICE! Risk of damage
A
Ensure that the objects placed in the cooler are suitable for
cooling or heating to the selected temperature.
Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze
and can therefore destroy the glass containers.
Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
NOTE
I
If you are not going to use the refrigerator for a long time, leave the
door slightly ajar to prevent unpleasant odours building up.
➤ Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
➤ Plug the 230 V connection cable into the AC voltage socket (fig. 1 1,
page 3) and connect it to the 230 V AC mains supply.
➤ Push the ECO switch to the required position ("ECO" or "MAX").
✓ The green LED (fig. 1 2, page 3) lights up. The refrigerator starts cooling
the interior.
➤ When you stop using the device, push the ECO switch to the "OFF" posi-
tion.
6.3
Changing the door hinge (fig. 2, page 3)
You can also change the hinge of the door, so that it opens to the left rather
than the right.
Proceed as follows to change the hinges:
➤ Loosen the four fixing screws (1) on the two hinges (2) with a screwdriver.
➤ Take off the door and the two hinges.
➤ Loosen the two blanking plugs (3) on the the door as well as on the refrig-
erator at the opposite side.
EN
Operation
9
Advertenties
