Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• If necessary, the door hinge can be switched
from right to left.
• Warning! Before carrying out any work on the
appliance, always disconnect the power plug
from the mains.
• To avoid personal injury and material damage,
carry out the shift of the door hinge with two
people.
• We recommend that the door stop only be
changed by qualified persons.
• Before you start, it is fundamental that you:
ū Always pay attention to the number of wash-
ers on the trunnion and screws.
ū Always align the doors so that they close
tightly.
a) Unscrew the two screws q which secure the
appliance top w from behind.
b) Slightly move the lid w of the device forward,
then lift it up and put it aside.
c) While securing the door, unscrew the 5 screws
e & r which hold the upper door hinge t.
Remove both door and hinge.
d) Loosen the screw s at the bottom right of the
door, which holds the entry a for the journal,
and remove both. Put the door aside in a safe
place.
e) Tilt the device slightly backwards and unscrew
the adjustable front feet y of the appliance.
f) Unscrew the screws u which hold the bottom
door hinge i.
g) Loosen the screws d which hold the door handle
f and take the blind plugs g out of the drill
holes on the right side of the door.
a) Refer to drawing B when unscrewing the journal
of the lower hinge i from the plate.
b) Turn the plate so that its underside is facing
upwards.
c) Then, replace the journal and secure it with
the nut. The newly configured lower door hinge
receives the number o.
a) Using the screws u, attach the lower door hinge
o to the bottom left side of the appliance.
b) Screw the adjustable front feet y back on the
appliance.
c) Put the entry a for the journal into the drill hole
on the bottom left of the door and secure it with
the screw s.
d) Put the door onto the journal of the bottom door
hinge o and gently press it onto the appliance.
e) While securing the door, attach the upper door
hinge t with the screws e & r on the top left
side of the appliance, in a way that ensures that
the upper journal slides into the aperture on the
door.
GS_8857 (BD-86)_multi.indd 23
All manuals and user guides at all-guides.com
Step A
Step B
Step C
f) Using the screws d, attach the door handle f
on the right side of the door. Put the blind plugs
g into the drill holes on the left side of the door.
g) On mounting the lid, w move it a little further
forward and then place it on the plastic board.
Use both screws to attach it from behind q.
Screw
Appliance top
Upper bolt
Upper screw
Upper door
hinge
Adjustable foot
Lower bolt
Lower right-
hand hinge
Lower left-hand
hinge
Entry for journal
Screw for entry
Screws for door
handle
Door handle
Blind plug
- 23 -
q
w
e
r
t
y
u
i
o
a
s
d
f
g
10.12.2018 14:22:29
Advertenties
Inhoudsopgave
