Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Instruction manual
Please read the instruction manual carefully before using this product.
The instructions are for reference only, the specific operation of the physical product prevails
Before First Use
Installing/Removing Batteries
To install the battery, please open the battery cover at the bottom of the camera (push it
gently to the right a little), and then push the front of the battery towards the screen into the
battery compartment until the battery is fully seated.
If you need to remove the battery, turn off the camera first, then according to the arrow on the
top right of the battery, unlock and remove the battery.
Installing/Removing SD Card
Before installing the SD card, please make sure that it has been formatted to FAT file system
format (Note: SD cards with a capacity of more than 32GB cannot be formatted to FAT format
on a computer, and need to be formatted in this camera). Open the battery cover, the SD card
slot is located in the upper left of the battery compartment; push the SD card (as shown in the
picture) towards the screen towards the inside of the card slot until it clicks into place. Now,
the installation is complete.
If you need to remove the SD card, first turn off the camera, then push the SD card towards the
inside of the card slot until you hear a 'click' as the SD card pops out, and then remove it.
ENG-3
Advertenties
Inhoudsopgave
