Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Marmitek MicroModule AWM2
Marmitek X10 transmitter for 2 addresses with a built-in
Applications
• The MicroModule can be installed behind conventional wall
switches or into wall outlets because of the extreme small size of
the MicroModule (minimum built-in depth 40 mm, advised 50
mm). The MicroModule is also ideal for installation into light
fixtures, home appliances or for use in areas with limited space
such as lowered ceilings.
• Universal compatibility: No limitation in choosing brand, color or
type of any wall switches and outlets.
• The MicroModule can be used in combination with regular
switches or pulse switches. These will be automatically recognized
by the AWM2.
• Install two-way switches without adding additional wires in
between wall switches (the MicroModules transmit their status to
the other MicroModuls through the power line).
• Execute Macro's and preferred scenarios of a conventional switch
(e.g. along with Marmitek ActiveHome).
Functions
• X10 Transmitter for 2 Marmitek X10 addresses and the commands
ON and OFF.
• Built-in appliance module (16A).
• Two way Marmitek X10 communication.
• Two wall switches can be connected with one AWM2. One serves
the internal appliance module and also gives the X10 command
through the power line. The second wall switch is used to transmit
a second X10 address using the commands ON/OFF.
• Every Marmitek X10 controller can be used to program the
Marmitek X10 address through the power line (e.g. a Marmitek
Remote Control or the CM11 Computer interface).
• One free programmable Marmitek X10 address A1 to P16 (base
address). The second address programs automatically and will
always be the next Marmitek X10 address following on the
MICROMODULE AWM2
All manuals and user guides at all-guides.com
appliance module.
3
Advertenties
Inhoudsopgave
