Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
Make sure that the surface is suitable for permanently and reliably taking the weight of the light.
•
Hold the lamp housing at the required assembly position and mark the drill holes. Use appropriate screws
to fix the light. Make sure that no lines are damaged.
•
Now connect the building installation's connection lines on the light. The brown (or black) cable is
generally the phase conductor - connect this to the terminal marked with "L". The blue conductor must be
connected to the terminal marked with "N".
•
Do not bend the cables; make sure that the cables and plugs are not subject to tension or torsional
forces. Protect all cables and insulation against possible damages.
•
Check proper connection once again.
•
Switch the building installation's fuse switch back on.
•
the luminaire shall be connected to the fixed wiring which have double insulation
6. Faulty Function
Light does not switch on
•
Light switched on at the wall switch?
•
Check the connected lines
7. Technical Data
Product
Connection
500585
230V AC∼, 50 Hz
500584
230V AC∼, 50 Hz
This product contains a light source of energy efficiency class F
8. Care
•
Disconnect the entire product from the mains first and let it cool down before cleaning or maintaining the
product.
•
Clean the product regularly using only a slightly moist, soft and lint-free cloth.
Pay attention to any enclosed instructions.
9. Waste Disposal
•
Old electronic devices must be taken to public waste disposal sites and must not be put into general
household waste.
Light
LED, 2W, 25 lm, 3000K
LED, 2W, 25 lm, 3000K
with PIR Sensor
Protection Type
Protection Class
IP 20
IP20
4 von 8 | 27.05.2022
II
II
Advertenties
Inhoudsopgave
