Download Print deze pagina

Power Dynamics 953.032 Gebruiksaanwijzing pagina 4

Verberg thumbnails Zie ook voor 953.032:

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 5
6. VOLUME 1
Rotate to adjust the volume of channel 1.
7. VOLUME 2
Rotate to adjust the volume of channel 2.
8. VOLUME 3
Rotate to adjust the volume of channel 3.
9. VOLUME 4
Rotate to adjust the volume of channel 4.
10. ECHO EFFECT
Rotate this knob to adjust the microphone echo level.
11. MICROPHONE 2 VOLUME
Rotate this knob to adjust the volume of the microphone 2 channel.
12. MICROPHONE 1 VOLUME
Rotate this knob to adjust the volume of the microphone 1 channel.
13. TALKOVER
Press to initiate talkover mode. Music volume level will be lowered when the microphone 1 channel registers input.
14. MICROPHONE 1 INPUT JACK
MIC 1 input jack for connecting an unbalanced low impedance microphone with 6.35mm (1/4") jack connector.
15. MICROPHONE 2 INPUT JACK
MIC 2 input jack for connecting an unbalanced low impedance microphone with 6.35mm (1/4") jack connector.
16. AUX INPUT
3.5mm auxiliary input jack for connecting an MP3 player or phone.
17. TREBLE
Rotate to adjust the high frequencies of channels 1/2/3/4.
18. BASS
Rotate to adjust the low frequencies of channels 1/2/3/4.
19. MUSIC VOLUME
Rotate to adjust the master music volume.
20. INPUT SELECTOR
Rotate to choose the favorable input.
21. FM ANTENNA CONNECTOR
Connector for installing an FM-antenna.
22. AUDIO INPUT
RCA audio input connectors for connecting to the audio output jacks of DVD- CD players.
23. LINE OUTPUT
RCA audio line output connectors. For connecting to the audio/subwoofer input RCA jacks of other devices/units.
24. SPEAKER OUTPUT
25. BT ANTENNA
BT streaming antenna. Aim the antenna at an angle of 45 degrees when using BT-audio.
26. OPTICAL INPUT
Optical (Toslink) connector for input of digital audio signals. To use the OPTICAL input, make sure the INPUT SELECTOR is
set to MP3. Press MODE until OPTI appears on screen.
27. COAX INPUT
Coaxial connector for the input of digital audio signals. To use the COAXIAL input, make sure the INPUT SELECTOR is set
to MP3. Press MODE until COAH appears on screen.
4

Advertenties

loading

Deze handleiding is ook geschikt voor:

Pv240bt