Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connecting the T4S/T8S via Analog Connection
1.
Make sure the device you are connecting to and the T4S/T8S are powered off and the T4S/T8S Master
volume control is set to minimum.
2.
Using XLR balanced cables, connect one or two devices to the XLR Stereo Outputs of your T8S (see
Figure 10).
Note: The T4S/T8S can be connected to a device via the Analog R Output port using a 1/4" TRS cable (sold
separately). Plug the other end of the TRS cable into the Analog Input port of the device. To connect the
T4S/T8S to two devices, connect a second device to the Analog L Output port on the T4S/T8S using a 1/4"
TRS cable.
3.
Connect a ToneMatch® power supply to the Power port of the T4S/T8S and plug it into a live AC outlet.
Refer to "Connecting the ToneMatch® Power Supply" on page 12.
4.
Turn on the T4S/T8S mixer and then turn on the device.
Connect your instruments and adjust levels. Refer to the complete owner's guide at www.Bose.com for
5.
complete operation information.
Figure 10. Two F1 systems connected to a T8S via analog connection
USB AUDIO
MAIN OUT
M
M
M
USB AUDIO
MONO
MAIN OUT
M
System Setup
English - 11
Advertenties
Inhoudsopgave
