Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
While playing a vinyl, just press (about 3 seconds) the key MODE. Then the device starts
recording music while flashing a green light until you press the key
Remember you can only record from vinyl to USB / SD cards.
Press
to play the previous songs.
Press
to play the next songs.
Press the key MODE to select USB, SD / MMC, Bluetooth mode or to start recording what is
being played on a USB or SD card.
Press the key
in the playback mode to start or pause it. Long press to erase what is cur-
rently recorded. In recording mode, press this key to stop recording.
When the tonearm is on the clamping piece, the Bluetooth function starts automatically.
Press the key MODE to switch between USB, SD and Bluetooth functions.
1. Open the tonearm clamp.
2. Remove the cartridge cover to expose the needle.
3. Carefully separate the cartridge from the cartridge holder.
4. Pull the audiolines carefully from the cartridge, taking care to pull the terminal connector
and not the cable.
5. Carefully insert the audio lines.
6. Make sure that the audio lines do not touch each other.
7. Carefully slide and fix the cartridge into its holder.
To fit a new cartridge, repeat process 3 and 4 in reverse order.
Note: Take special care while changing the head to avoid damage to the boom or the audio
cable. The turntable head should be replaced every 3 to 4 months of continuous use. Ceramic
heads are easily found in specialist stores and websites.
• We recommend to clean your records with an anti-static cloth in order to enjoy optimum
playback quality and to help make them last.
• For the same reason, your stylus should be replaced periodically (approximately every 250
hours of total playback time).
• Clean the dust on the stylus from time to time by using a very soft brushe dipped in alcohol
(brushing from back to the front of the cartridge.
10
E NGL I SH
RECORDI NG
B LUE TOO TH CO NFI G UR ATIO N
HOW TO REPLACE THE NEEDLE HEAD
CLEANING
to stop recording.
Advertenties
Inhoudsopgave
