Advertenties
Beschikbare talen
Beschikbare talen
EVO
FC66003563
Rev 02
ELECTRONIC BOARD
Install the I/O board on, DUCTIMAX,
ESTRO, FLAT and UTN units using the
relative clamping bracket and the supplied
9.5 mm screws.
Screw the 3-way terminal board onto the
bracket using the supplied 25 mm screws;
Install the bracket onto the side of the unit
that is opposite the water infeed/outfeed
manifolds.
On the PWN unit, install the I/O board
directly onto the electrical connections box
using the supplied 9.5 mm screws.
Set up the electrical connections as
illustrated in the electrical diagram; use the
cable with a 1.5 mm
unit terminal board (CN) to the board
USER MANUAL
IT IS strictly forbidden to reproduce this manual, even partially
section to connect the
2
EN
3
Advertenties
