Advertenties
Beschikbare talen
Beschikbare talen
1
Display (See §. 2.3).
2
Range key: operative in VAC, VDC, VLOWZ, Ω, C, AAC, ADC ranges.
Yellow key: MODE AC/DC
The AC mode is selected (default) on V and DC is selected (default) on A.
• Switch to AC or DC mode by briefly pressing the same key (short beep).
3
• The current mode is displayed on the LCD.
• To disable the sleep mode: hold down
• Sleep mode is disabled and symbol
longer.
Hold key:
• Holds the display on the current value and freezes it (short press).
4
• A second short press returns the multimeter to normal mode.
• This key is operative in all ranges (excepted NCV).
5
OFF: power is off.
6
NCV: Non Contact Voltage Detection (230V) 50 Hz
7
VLowZ: Low impedance voltage measurement, AC
8
V AC/DC: voltage measurement (10MΩ), AC or DC
9
T: TK-thermocouple temperature measurement, in °C or in °F
10 OHM/CONTINUITY/DIODE/CAPACITANCE:
11 A: current measurement in A, AC or DC
12 mA: current measurement in mA, AC or DC
22
BDA_Digital-Multimeter-Professional_B205xH115.indd 22
while turning the meter on.
(permanent) won't display any
13 μA: current measurement in μA, AC or DC
14 Input terminal for AC and DC current measurement to 10A
15 Common (return) terminal for all measurements
Input terminal for voltage, resistance, continuity, diode, capacitance, and
16
temperature measurements
Input terminal for AC and DC microamps and milliamp measurements to
17
600mA
Default Auto-range.
13.01.17 13:02
Advertenties
