NEVER pull the cord itself to pull the plug from the socket. NEVER use extension cords and ALWAYS unroll the
‐
cord completely.
NEVER use the cord in the proximity of sources of heat, such as ovens, stoves or heating.
‐
NEVER turn the cord around the appliance when in use. NEVER fold or pinch the cord. NEVER let the cord hang
‐
over the edge of the table or kitchen counter.
NEVER use the appliance when the cord is damaged. In that case, immediately bring the appliance to a
‐
recognized repair expert.
The appliance is intended for household use.
‐
Repairs can only be executed by a recognized expert or a recognized repair shop.
‐
Persons who haven't read this instruction manual cannot use this appliance.
‐
ALWAYS switch off the appliance and pull out the plug
‐
* After use or when the appliance is not in use
* If the food processor
* When cleaning the appliance
II. GENERAL INSTRUCTIONS OF USE
First remove the knives before removing the content of the bowl.
‐
NEVER put your hands or any sort of cooking utensils in the bowl while the CSG2300 is in use.
‐
Only use wooden, rubber or plastic cooking utensils. NEVER use force to push food down into the bowl or to
‐
remove food from the knives.
Before removing the lid from the bowl: turn off the appliance, wait till the motor has stopped completely, and pull
‐
the plug from the socket.
Precooked ingredients first need to be cooled down before adding them. If you do want to add hot ingredients, be
‐
careful not to burn yourself on the bowl, the damp or the spatters. If needed you can put a kitchen towel over the lid
to protect yourself.
NEVER use the safety lock to fix bowl on the motor block as on/off switch for the CSG2300.
‐
ALWAYS use the ON/OFF switch.
III. BEFORE FIRST USE
Remove all packagings and stickers. In the packaging you will find the food processor, 1 bowl, 1 lid for the chopper
function, 1 lid with filling shaft and pusher for the slicer-grater function, 1 stainless steel knife, 1 double-sided disk and
the instruction manual. Before first use, we advise to clean all the parts in soapy water, except for the motor block.
This is best to be cleaned with a moist cloth. You can only turn on the appliance when all parts/accessories are
assembled correctly.
IV. USE OF THE CSG2300
a. Chopper function
This is a multifunction accessory. For a really fine result you will have to let the appliance run for a longer time than for
a coarse result. To achieve a coarse result just as you wish, you can use the "Pulse function".
1. Put the bowl on the motor block and fix it by means of the safety lock. (Fig. A)
2. Put the knife on the gearbox in the mixing bowl.
3. Add the ingredients
4. Put the lid on the bowl and fix it by means of the safety lock (Fig.B).
ATTENTION: the appliance won't work if it hasn't been correctly assembled.
5. Plug in the Appliance and turn the switch to the ON position. Use the "Pulse Function" for short pulses. This
function runs as long as you keep the button pushed.
6. When ready, turn the switch to the OFF position. Wait to remove the lid until the motor has fully stopped turning.
7. To remove the lid, knife and bowl, repeat the above mentioned steps in reverse (1-4).
CAUTION: the mixing bowl is NOT suited for mixing hard ingredients, such as coffee beans, lumps of sugar...
TIPS:
Do not use the appliance for more than 2 min. continuously. Let the motor cool off for 5 minutes before continuing,
‐
in order to avoid overheating.
When chopping meat, do not forget to remove all bones first.
‐
If you want to chop several ingredients in a row, always start with the most firm ingredient.
‐
All manuals and user guides at all-guides.com
11