Advertenties
Beschikbare talen
Beschikbare talen
en operation
7.3 Using the blender to pro-
cess food
WARNING
Risk of injury!
Improper use may cause injuries.
▶
Only use the appliance once it is
fully assembled.
Prepare the food.
1.
For example, cut large items of
food into pieces.
Check the seal on the EasyClick
2.
blade insert. If a seal has been re-
moved, reinsert it correctly.
→ Fig.
3
Note: The seal remains on the
EasyClick blade insert for cleaning.
If the seal is damaged or not cor-
rectly positioned, liquid may run
out.
a The seal is seated in the groove.
a The sealing lips point in the direc-
tion of the blender jug.
a The smooth sealing surface lies
against the EasyClick blade insert.
Turn the blender jug upside down.
3.
Open the retaining bracket.
4.
→ Fig.
4
Align the EasyClick blade insert
5.
with the tap in the blender jug.
Push the EasyClick blade insert
6.
into the blender jug and close the
retaining bracket until it clicks into
place.
→ Fig.
4
Set the rotary switch to .
7.
Place the blender jug onto the
8.
main unit and rotate in a clockwise
direction until it locks into place.
→ Fig.
5
Add the food to the blender jug.
9.
→ Fig.
6
Observe the minimum and max-
imum processing quantities.
→ "Overview of recipes", Page 38
34
Insert the measuring jug in the lid
10.
and place the lid on the blender
jug.
→ Fig.
7
The
and
match up.
Turn the lid in the direction
11.
it clicks into place.
→ Fig.
8
The lid must be completely closed.
a The colour of the lock indicator for
the lid changes from red to green.
Insert mains plug.
12.
Set the rotary switch to .
13.
→ Fig.
9
a The status display (LED) on the
rotary switch lights up.
Set the rotary switch to the recom-
14.
mended speed.
→ Fig.
10
Process the ingredients until you
15.
achieve the required result.
To end the operation, set the rotary
16.
switch to .
7.4 Using instantaneous
switching
Set the rotary switch to
1.
hold it there.
→ Fig.
11
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
a The rotary switch jumps to .
a Processing stops.
7.5 Using programmes
Requirements
¡ The blade insert is installed.
¡ The blender jug has been attached
and locked.
¡ The blender jug is filled with the
food or ice cubes.
¡ The lid is attached and locked.
¡ The rotary switch is set to .
markings must
and
until
Advertenties
