Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
9. Operation
a) Setting up and mounting
When choosing an installation location for your product, ensure that you avoid impacts,
vibrations, dust, hot and cold temperatures and damp environments. In addition, no powerful
transformers or motors should be used close to the product.
Never place the product in direct proximity of heat sources. Do not point any strong spotlights or
light sources at the device. This may cause the product to overheat!
Highly flammable materials such as decorative fabrics must also be kept at a distance (>1 m)
from the device. There is a risk of fire!
The product may never be used without the castor set and stand. First mount the castor set and
stand before putting the product into operation for the first time.
• Mount the first castor of the castor set (A) in the
order shown on one side. You will need a suitable
Philips screwdriver.
• Put the pre-assembled castor set in the suspension
on the radiator.
• Mount the other castor of the castor set in the
order shown here.
• Screw the stand (B) with the two screws M3 on the lower side of the
product. You will need a suitable Philips screwdriver.
Move the product at the handle (D).
22
2
2
1
1
3
Advertenties
Hoofdstukken
Inhoudsopgave
