Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Before first use
Carefully unpack the product and accessories.
Place the water container
level surface near a power socket (230–240 V∼,
50 Hz).
Ensure that there are no objects near the area
which could get damaged by water spray whilst
the product is in use.
Start up/Use
Installation for HG04214D
Q
(Fig. A)
Fill the water container
MAX (inside wall) with distilled water with
awatering can or bottle.
The LEDs
already pre-installed. You can pull
7
them off for cleaning. When you then attach
them again, push the LEDs
hose
to the connection between the supply
1
hose and the decorative attachment. The LEDs
must face in the direction of the decorative at-
tachments.
Put the supply hose
supply nozzle
and the attached pump
2
into the water container
and lead the power lead
on the back of the base plate back.
Hints: The lead to the LEDs
water container
.
6
Your product is now ready for use.
Installation for HG04214C
Q
(Fig. B)
Fill the water container
MAX (inside wall) with distilled water with
watering can or bottle.
Note: The LEDs
7
over the hose
. You can pull them off the
9
hose
for cleaning. When you then attach
9
on an even and
6
up to the marking
6
over the supply
7
of the pump
in the
1
3
3
by suction cups
6
through the notch
4
can placed inside
7
up to the marking
6
are already pre-installed
them again, the LEDs
tion of the decorative attachments
Put the supply hose
supply nozzle
Put the attached pump
tainer
by suction cups
6
power lead
Hints: The lead to the LEDs
water container
Your product is now ready for use.
Switching the product on/off
Plug the mains adaptor
LEDs light up and water flows from the product.
Unplug the mains adaptor
to turn off the product.
Changing the water/
maintenance/cleaning/care
LIFE BY ELECTRIC SHOCK! Pull
the mains adaptor
socket before carrying out any work on the
10
product.
Always use distilled water to avoid the build up of
lime scale!
Note: Water can be evaporated during operating,
fill the water up to "MAX" when water level fall to
"MIN".
Note: To avoid the build up of algae you should
clean regularly change the water and and clean the
water container
at regular intervals - at least once a week.
Note: Only use water and few detergent to clean
the fountain.
For HG04214D:
Carefully pour the water out.
Pull the supply hose
.
2
Pull off the LEDs
must face in the direc-
7
8
of the pump
1
.
2
into the water con-
3
and lead the
10
through the back.
4
can placed inside
7
.
6
into the mains. The
5
from the mains
5
DANGER TO
out of the
5
and decorative attachment
6
out of the supply nozzle
1
from supply hose
7
GB/IE/NI
.
in the
3
8
.
1
9
Advertenties
Hoofdstukken
Inhoudsopgave
