Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
g. 1
A
g. 3
C
E
g. 5
H
X
X
g. 7
INSTALLATION
g. 2
B
D
g. 4
G
F
G
g. 6
I
g. 8
- 29
3) FLUE OUTLET AT THE TOP
MYA is set up to allow the ue pipe to be connected at the top
or the back.
The stove is delivered ready for the ue pipe to be tted at the
back.
To allow the ue pipe to be connected at the top, the speci c
optional extra kit must be used (code
760680). The kit includes the following parts:
- N° 1 80 Ø clamp (L)
- N° 1 inspection elbow (M)
- N° 1 ue pipe outlet (P)
- N° 2 top ue pipe outlet closers (Q)
To t the kit, proceed as follows:
For the version with glass sides
- Remove the supported glass top (A - g. 1).
- Open the door and remove the galvanised panel (B - g. 2)
- Slacken the wing nuts at the lower and upper ends on the
inside of the left side (C/D - g. 3/4).
- Close the door and remove the plating pro les on the back
(E - g. 5).
- Remove the glass side (F - g. 6) removing the clamps (G -
g. 6).
- Then proceed to t the kit as indicated on the next page.
For the version with steel sides
- Remove the supported glass top (H - g. 7).
- Remove the side steel, xed to the structure of the stove with
2 screws (X - Fig. 7) to remove, pulling it upwards (I - Fig. 8)
- Then proceed to t the kit as indicated on the next page.
-
Advertenties
Inhoudsopgave
