Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UK
1. Remove the collection tray.
2. Lay the appliance face down.
3. Unscrew the two screws
holding the safety guard at the
rear of the Fly Killer
[Fig. 1].
4. Lift up the guard rail [Fig. 2].
5. Holding the ends of the bulb,
twist it 'forwards' in its socket
until it clicks [Fig. 3].
6. Slide the bulb up out of its
sockets [Fig. 4].
7. Replace with a new bulb.
8. Twist the new bulb 'backwards'
to lock it back in place.
9. Replace the guard rail and the
two screws.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is
The unit is not switched on
not working
Plug or lead are damaged
Fuse in the plug has blown
Mains power supply fault
Tube has expired
Tube is faulty or has not been fitted
correctly
4
FD499_ML_A5_v2_20220118.indb 4
FD499_ML_A5_v2_20220118.indb 4
1
2
3
4
Probable Cause
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the plug fuse
Check mains power supply
Refer to the 'Changing the Bulb' section
Solution
2022/1/18 17:18
2022/1/18 17:18
Advertenties
Inhoudsopgave
