Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTRUCTION
6 OPERATION
CAUTION! Health hazard!
• Food may only be stored in its original packaging or in suitable containers.
NOTE
• Before starting your new cooling device for the first time, you should clean it inside and
outside with a damp cloth for hygienicreasons (please also refer to the chapter "Cleaning and
maintenance"on page 7.
• A few water drops may form inside the cooler if it has been cooling for a lengthy period. This is
normal because the moisture in the air condenses to water when the temperature in the cooler
falls. The cooler is not defective. Wipe it out with a dry cloth if necessary.
6.1 Energy saving tips
• Choose a well ventilated installation location which is protected against direct sunlight.
• Allow warm food to cool down first before placing it in the device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooler unit open for longer than necessary.
• Remove individual drinks bottles through the bottle hatch, if present.
6.2 Using the cooler
NOTICE! Risk of damage
• Ensure that the objects placed in the cooler are suitable for cooling or heating (with the ad-
ditional heating feature) to the selected temperature.
• Ensure that food or liquids in glass containers are not excessively refrigerated. Liquids expand
when they freeze and can therefore destroy the glass containers.
• Ensure that your cooler is well ventilated so that any heat created can dissipate. Otherwise
proper functioning cannot be ensured. It is especially important not to cover the air vents.
NOTE For coolers with fold in handles
➤ Place the cooler on a firm base.
Connection cable plug
DC
Coolers without the additional heating feature
➤ Connect the corresponding cable (see figure) to the required voltage.
✓ The cooler starts cooling the interior.
➤ To switch off the cooler, disconnect the plug.
Coolers with the additional heating feature
➤ Connect the corresponding cable (see figure) to the required voltage.
➤ For fast cool down switch to MAX on the cool box. Please be aware that doing so you will not run on ECO
mode. We advice that the ECO function is primarily used.
➤ Push the switch on the control panel to HOT or COLD to switch the cooler on.
✓ The indicators on the control panel show you the operating mode:
6
AC
Advertenties
Hoofdstukken
Inhoudsopgave
